No in morse code
Two letters and 5 marks, four of them long. Press Play to hear it and see it blink. On the air, operators often send N alone.
-. ---
The flashlight needs camera access. Nothing is recorded or sent.
How to blink No with a flashlight
Count a steady beat. A dit (the short signal) is one count of light, and a dah (the long one) is three. Stay dark for one count between flashes and three counts between letters.
- N: one long, one short.
- O: three long flashes.
- Stay dark for seven counts, then start again from the first letter.
Download No in morse code
The pattern as a picture, each letter named under its marks, for a card, a craft project or a tattoo sketch. The PNG is ready to print or share; the SVG scales to any size.
No as a morse code bracelet
Each dit is a round bead and each dah a tube three times as long, with a small spacer between letters. For a 7 in bracelet in 3 mm beads: 1 dit bead, 4 dah tubes, 1 spacer and 45 plain beads.
How no is put together
N is a dah and a dit, and O is three dahs. That adds up to 5 marks, four of them dahs, so the word is mostly long notes. At 10 words per minute (WPM), the speed the player starts at, no takes 19 units, about 2 seconds.
How radio operators say no
The International Amateur Radio Union’s operating guide lists N on its own as no. That is two marks, a dah and a dit, against five for the whole word.
ITU-R M.1172, the list of abbreviations for radio at sea, keeps the word whole: it lists NO as no. Sent straight after certain Q codes, NO gives the code a no meaning, as C gives it a yes.
Yes and no side by side
Yes is three letters and 8 marks, and no is two letters and 5. Both start with a dah and a dit. The difference comes on the third mark: Y goes on with two more dahs, while N stops, and the three units of silence before O tell the listener the letter is over.
Questions
What is no in morse code?
A dah and a dit for N, then three dahs for O. That's 5 marks, and the Copy morse button above copies it as text.
What are yes and no in morse code?
No is N and O, 5 marks; yes is Y, E and S, 8 marks. Yes in morse code plays it and shows how operators shorten it.
How do you say no in morse code with a flashlight?
Follow the steps above, one letter at a time, with one count of dark between flashes and three between letters. Press Play first to watch the lamp keep the rhythm.
What is no in morse code to English?
A dah and a dit spell N, and three dahs spell O, so the pair reads no. Paste any other dots and dashes into the morse code translator to read them.
How do you say please in morse code?
P, L, E, A, S and E, 15 marks in all. Radio operators shorten it to PSE, which the International Amateur Radio Union's operating guide lists among the most used abbreviations.
More morse tools
- Morse code translator
Type any text to hear it in morse, or paste morse to read it.
- Printable morse code chart
Every letter and number drawn to scale, for US Letter and A4.
- Morse code numbers
0 to 9, and the pattern that makes them quick to learn.
More phrases in morse code
- SOS in morse code
Three dits, three dahs and three dits, with no pause between the letters.
- Thank you in morse code
Eight letters in two words, 22 marks in all.
- Yes in morse code
Three letters and 8 marks.
- Happy birthday in morse code
Thirteen letters in two words, 41 marks in all.
- Hello in morse code
Five letters and 16 marks, with the double L in the middle.
Sources
- Codes and timing follow Recommendation ITU-R M.1677-1 (10/2009), International Morse code (International Telecommunication Union, 2009).
- Recommendation ITU-R M.1172: Miscellaneous abbreviations and signals to be used for radiocommunications in the maritime mobile service (International Telecommunication Union, 1995).
- Ethics and Operating Procedures for the Radio Amateur (edition 3) (International Amateur Radio Union, 2010).